Category:Relay

From ElectroDragon
Jump to: navigation, search

Introduction

The module is uses SRD relay module to control high-votage elecrical devices. (maximum 250V).It can be used in interactive projects and can also be used to control the lighting, electrical and other equipments. It can be controlled directly by a wide range of microcontrollers and can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.

Schematic, Wiring

Demo Code

int Relay = 3;
 
void setup()
{
  pinMode(Relay, OUTPUT);     //Set Pin3 as output
}
void loop()
{
          digitalWrite(Relay, HIGH);   //Turn off relay
          delay(2000);
          digitalWrite(Relay, LOW);    //Turn on relay
          delay(2000);
}


Guides

Mode Type Specs Size Lengh x Width x Height mm Feature Surge voltage Withstand Voltage (Coil-contact)
HF32F-G/005-HS 5V SPST 4P 10A/250VAC/30VDC - - - 2500VAC
HF32FA-G/005-HSL2 SPST 4P 10A/250VAC/30VDC - - 5kV 5000VAC
HF33F/005-HS3 SPDT 5P 5A/250VAC/30VDC - - - 4000VAC
HF46F/24-HS1 SPDT 4P 5A/250VAC/30VDC - - 10kV 4000VAC
SRD-05VDC-SL-C 5V TRIAC 5P 10A/250VAC/30VDC 19.5 x 15.8 x 16 standard common use
SRS-12VDC-SL 4100 12V  ? 6P 3A/250VAC 30VDC 15.4 x 10.4 x 11.6 subminimature
SRA-05VDC-CL T74 5V  ? 5P 20A/125VAC 14VDC -
HK19F-DC 5V-SHG  ? 8P 1A 125VAC/2A 30VDC 20 x 10 x 12
OMRON G3MB-202PL DC-AC SSR 4P 2A 264VAC 24.5 x 5.5 x 20.5
Mager GJ-5-L DC-AC SSR 4P 3-32VDC 5A 380VAC 38.5 x 12.5 x 22
HOYMK SSR-D3805HK DC-AC SSR 4P 3-32VDC 5A 380VAC 43 x 12 x 25

Documents

Pages in category "Relay"

The following 2 pages are in this category, out of 2 total.