OpenWrt

From ElectroDragon
Jump to: navigation, search

Mics

  • Set lanuage and UI style

Openwrt set style and lanuage.png

Bridge network LAN

  • bridge the network, add Vlan2, Vlan2 is already setup in this firmware

Openwrt bridge network.png

Set Static network environment

set

IP address - 192.168.1.120
gateway - 192.168.1.1
netmask - 255.255.255.0 
DNS - 192.168.1.1

Openwrt set DHCP network.png

  • diagnostic network

Openwrt Diagnostics network.png

Vlan (experimental..)

  • Don't have to add Vlan2, but re-setup Vlan1 as follow
  • completed turn off Vlan2, but set Vlan1

Openwrt vlan switch.png

  • Now the router can be visited via the main network

Apps

opkg package management

  • list-installed
  • remove
  • update
  • Check the opkg source address

my correct address is barrier_breaker http://downloads.openwrt.org/barrier_breaker/14.07/ramips/rt305x/packages/packages, replacing it in the follow text Openwrt opkg configuration.png

Notes

  • Error "returned 127" can be ignore when install packages.

Openwrit error returned 127.png

  • No need to setup anything for firewall

Reference