4-Phase 5-Wire Stepper Motor, 28BYJ-48-5V
stepper motor connection
4-Phase 5-Wire Stepper Motor, 28BYJ-48-5V

4-Phase 5-Wire Stepper Motor, 28BYJ-48-5V

N20 High Torque Force Reducing Motor
5.00 out of 5
4 customer reviews|Add a review

$2.00

SKU: SCU1024 Category: Tags: ,

Description

Model Version: 28BYJ-48-5V

Specification:

  • Diameter: 28mm
  • Voltage: 5V
  • Step angle: 5.625 x 1 / 64
  • Reduction ratio: 1 / 64

5 Line 4 phase can be driven by ordinary ULN2003 chip can also be connected in phase 2 development board used for supporting the use of a direct plug and easy to use stepper motor used in the development board.

You will need any motor driver shield to make it work, preferable ULN2003 board, and the driving shield could control by arduino or other MCU

Documentation please see on this page. 

Additional information

Weight 0.04 kg

4 reviews for 4-Phase 5-Wire Stepper Motor, 28BYJ-48-5V

  1. 5 out of 5

    lasupermarmota –

    The motor is a little slow, 1 turn/3 seconds. But its a reduced so it is strong.
    Test in arduino with this code

    /*
    Connect like this:
    ARDUINO ULN2003 STEPPER M.
    Red = 5v
    4——-1 16——Orange
    5——-2 15——Yellow
    6——-3 14——Pink
    7——-4 13——Blue
    Gnd–8 9–+5v
    */

    void setup() {
    // initialize the LED pin as an output:
    pinMode(4, OUTPUT);
    pinMode(5, OUTPUT);
    pinMode(6, OUTPUT);
    pinMode(7, OUTPUT);
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);

    }

    void loop(){
    int time = 800;
    //step 1
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 2
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 3
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, LOW);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 4
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, HIGH);
    //step 5
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, LOW);
    digitalWrite(7, HIGH);
    //step 6
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);
    //step 7
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, LOW);
    //step 8
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, LOW);

    }

  2. 5 out of 5

    jounihuo (verified owner) –

    One of the cheapest steppers out there. Works great with Arduino and the stepper driver board!

  3. 5 out of 5

    remymorra (verified owner) –

    gooooooooooooood

  4. 5 out of 5

    bandula de silva –

    i used the above programme it is perfectly work thank you very much and did some modifications to run the stepper motor to rotate in reverse direction. i included two functions to do it
    here is the listing
    /*
    Connect like this:
    ARDUINO ULN2003 STEPPER M.
    Red = 5v
    4——-1 16——Orange
    5——-2 15——Yellow
    6——-3 14——Pink
    7——-4 13——Blue
    Gnd–8 9–+5v
    */
    int time = 4;int j=0;
    void setup() {
    // initialize the LED pin as an output:
    pinMode(4, OUTPUT);
    pinMode(5, OUTPUT);
    pinMode(6, OUTPUT);
    pinMode(7, OUTPUT);
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);

    }

    void loop(){
    while(j<1000)
    { j++;
    forward();
    }
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);
    delay(300);
    j=0;
    while(j<1000)
    { j++;
    reverse();
    }
    //wait
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);
    delay(300);
    j=0;

    }
    void reverse()
    {
    //step 9
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, LOW);
    //step 10
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);
    //step 11
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, LOW);
    digitalWrite(7, HIGH);
    //step 12
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, HIGH);
    //step 3
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, LOW);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);

    //step 2
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 1
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    }
    void forward()
    {//step 1
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 2
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, LOW);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 3
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, LOW);
    digitalWrite(6, HIGH);
    digitalWrite(7, HIGH);
    //step 4
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, LOW);
    digitalWrite(6, LOW);
    digitalWrite(7, HIGH);
    //step 5
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, LOW);
    digitalWrite(7, HIGH);
    //step 6
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, LOW);
    digitalWrite(7, LOW);
    //step 7
    delay(time);
    digitalWrite(4, HIGH);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, LOW);
    //step 8
    delay(time);
    digitalWrite(4, LOW);
    digitalWrite(5, HIGH);
    digitalWrite(6, HIGH);
    digitalWrite(7, LOW);
    }

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Product Enquiry