RF1100-232 Transceiver Module Configuator Guide
We have a wireless module RF1100 with 232 protocol, pretty simple and easy to use, now thanks to yesyes DIY, there is a windows-based software to tell you how to program it, see the original link here.
You can the RF1100-232 Module here. It fully looks same like this.
You can use this configurator to many things, the most important thing is configuring port speed, channel, module ID, power strength, see how the interface of this tool looks like:
Like description in the NO 12:
12 – Here you can configure the module and send the configuration commands individually. Select the serial port speed (4800, 9600 or 19200), channel number (0 – 255), Module ID (0 – 65535) or TX power (0, 5, 7 or 10 dbm). Then click the corresponding Set button to send the command. If you set the serial port speed of the module, the COM port will automatically be set to the new speed. The Channel and Module ID text boxes automatically check the validity of the entered values as you type. If there is an error, the text box background will turn red. If everything is OK, the background will change to pale green. (see screenshots above and below)
Another copy of this tool can download from here too!
Share this post
Leave a Reply
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Comments (2)
what is the command to write or read data from the module?
This makes embedding it much easier.