CC2530

From ElectroDragon Wiki
  • CC2530F256RHAR
  • 2.4-GHz IEEE 802.15.4
  • ZigBee


Config Steps of CC2530 Board

  • two red led on top, two green leds on bottom
  • Long press and release to enter into next config
  • Modules can communicate when the channel is same, even baudrate is different
Cc2530 config.png
Step Action (short press) Indication
1. Enter into Config HOLD button and power up all leds blink in turn
2. config baudrate switch baudrate see image on the right
3. Set wireless channel choose channel LED indicate 16 channels, including all leds off status
4. Mode set switch in three modes see image on the right
5. Confirm - long press until led blink in turns, and release LED will remain for 2 secs and done