MSP430-Flasher

From ElectroDragon Wiki
(Redirected from MSP Flasher)

Example MSP430F149

c:\ti\MSPFlasher_1.3.19>MSP430Flasher -n MSP430F149

  • * -----/|-------------------------------------------------------------------- *
  • * / |__ *
  • * /_ / MSP Flasher v1.3.19 *
  • * | / *
  • * -----|/-------------------------------------------------------------------- *
  • *
  • * Evaluating triggers...done
  • * Checking for available FET debuggers:
  • * Found USB FET @ COM266 <- Selected
  • * Initializing interface @ COM266...done
  • * Checking firmware compatibility:
  • * FET firmware is up to date.
  • * Reading FW version...done
  • * Setting VCC to 3000 mV...done
  • * Accessing device...done
  • * Reading device information...done
  • *
  • * ----------------------------------------------------------------------------
  • * Arguments  : -n MSP430F149
  • * ----------------------------------------------------------------------------
  • * Driver  : loaded
  • * Dll Version : 31400000
  • * FwVersion  : 31100001
  • * Interface  : TIUSB
  • * HwVersion  : U 1.40
  • * JTAG Mode  : AUTO
  • * Device  : MSP430F149
  • * EEM  : Level 2, ClockCntrl 0
  • * VCC OFF
  • * ----------------------------------------------------------------------------
  • * Powering down...done
  • * Disconnecting from device...done
  • *
  • * ----------------------------------------------------------------------------
  • * Driver  : closed (No error)
  • * ----------------------------------------------------------------------------
  • */

Example MSP430G2553 2-Wire JTAG

  • c:\ti\MSPFlasher_1.3.19>MSP430Flasher -n MSP430G2xx3
  • * -----/|-------------------------------------------------------------------- *
  • * / |__ *
  • * /_ / MSP Flasher v1.3.19 *
  • * | / *
  • * -----|/-------------------------------------------------------------------- *
  • *
  • * Evaluating triggers...done
  • * Checking for available FET debuggers:
  • * Found USB FET @ COM266 <- Selected
  • * Initializing interface @ COM266...done
  • * Checking firmware compatibility:
  • * FET firmware is up to date.
  • * Reading FW version...done
  • * Setting VCC to 3000 mV...done
  • * Accessing device...done
  • * Reading device information...done
  • *
  • * ----------------------------------------------------------------------------
  • * Arguments  : -n MSP430G2XX3
  • * ----------------------------------------------------------------------------
  • * Driver  : loaded
  • * Dll Version : 31400000
  • * FwVersion  : 31100001
  • * Interface  : TIUSB
  • * HwVersion  : U 1.40
  • * JTAG Mode  : AUTO
  • * Device  : MSP430G2xx3
  • * EEM  : Level 1, ClockCntrl 1
  • * VCC OFF
  • * ----------------------------------------------------------------------------
  • * Powering down...done
  • * Disconnecting from device...done
  • *
  • * ----------------------------------------------------------------------------
  • * Driver  : closed (No error)
  • * ----------------------------------------------------------------------------
  • */