Teacup Firmware

• https://github.com/Traumflug/Teacup_Firmware/tree/Arduino_UNO_and_NANO

Configuration

• Python 2.7.x or later, but not Python 3.x.

• https://reprap.org/wiki/Teacup_Firmware#Simple_Installation

Install

• https://github.com/Traumflug/Teacup_Firmware/archive/master.zip

Config

• configtool.py -> generate config.h <- config_wrapper.h use it

configtool.py generate

• board config = #include "config\board.sinaptec-at328-02.h"
• printer config = #include "config\printer.mendel.h"

default branch arduino nano:

• #define USER_CONFIG "config.arduino_nano.h"

Note

• Config can use python 3
• setup pins accordingly
• Delete CMSIS .. .s .c .h for ARM GCC and compile in arduino