Difference between revisions of "3G"

From ElectroDragon
Jump to: navigation, search
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
== Step by Step GIF Tutorial ==
 +
Use on windows
 +
<gallery>
 +
File:Sim5360e_rough_test.gif | Driver installed, and call test
 +
</gallery>
 +
* Install driver, will display Modern, Ethernet, AT Port, diagnosis port
 +
* Use AT port can send commands regularly.
 +
Use on raspberry pi linux, etc (still testing)
 +
* Just connect via USB cable directly: Bus 001 Device 006: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem
 +
<gallery>
 +
File:2018-06-21_141320.png | wwan0 modem
 +
File:2018-06-21_141330.png | recorgnized USB device SIM5360E
 +
</gallery>
 +
 +
* Reference find here: https://www.thefanclub.co.za/how-to/how-setup-usb-3g-modem-raspberry-pi-using-usbmodeswitch-and-wvdial
 +
* Install by command sudo apt-get update and sudo apt-get install ppp usb-modeswitch wvdial
 +
* Get modem config file: tar -xzvf /usr/share/usb_modeswitch/configPack.tar.gz 05c6\:9000 ('''get error on this step, probably no config file yet ''')
 +
* Config the default USB modem by nano /etc/usb_modeswitch.conf, copy message content
 +
 +
* Config nano /etc/wvdial.conf
 +
[Dialer 3gconnect]
 +
Init1 = ATZ
 +
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
 +
Init3 = AT+CGDCONT=1,"IP","internet"
 +
Stupid Mode = 1
 +
Modem Type = Analog Modem
 +
ISDN = 0
 +
Phone = *99#
 +
Modem = /dev/gsmmodem
 +
Username = { }
 +
Password = { }
 +
Baud = 460800
 +
* Connect
 +
sudo usb_modeswitch -c /etc/usb_modeswitch.conf
 +
wvdial 3gconnect
 +
=== Notice ===
 +
* So far for the test, driver can not be properly installed in Windows 10 by us, but no problem for Windows 7, also no problem in virtual windows 7 machine.
 +
 
== IC Pins Definition ==
 
== IC Pins Definition ==
 
<gallery>
 
<gallery>
Line 9: Line 47:
 
File:BK-SIM5320_Schematics_v1.1A.jpg | SIM5320 SCH
 
File:BK-SIM5320_Schematics_v1.1A.jpg | SIM5320 SCH
 
</gallery>
 
</gallery>
 +
 +
== Documents ==
 +
* [[File:SIM5360_Hardware_Design_V1.06.pdf|SIM5360E Hardware design manual V1.06]]
 
[[category: Topics]]
 
[[category: Topics]]

Latest revision as of 02:45, 21 June 2018

Step by Step GIF Tutorial

Use on windows

  • Install driver, will display Modern, Ethernet, AT Port, diagnosis port
  • Use AT port can send commands regularly.

Use on raspberry pi linux, etc (still testing)

  • Just connect via USB cable directly: Bus 001 Device 006: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem
  • Config nano /etc/wvdial.conf
[Dialer 3gconnect]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet"
Stupid Mode = 1
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
Modem = /dev/gsmmodem
Username = { }
Password = { }
Baud = 460800
  • Connect
sudo usb_modeswitch -c /etc/usb_modeswitch.conf
wvdial 3gconnect

Notice

  • So far for the test, driver can not be properly installed in Windows 10 by us, but no problem for Windows 7, also no problem in virtual windows 7 machine.

IC Pins Definition

Development Board Schematic

Documents