Jump to navigation Jump to search
Revision as of 01:37, 31 December 2019 by Chao (Created page with "== Mutil-Cells Battery Charge Mangement == <gallery> File:Cn3722_datasheet.jpeg| CN3722 datasheet, File:Cn3722_fb_voltage.png | CN3722 Fb resistor setup </gallery> === Featur...")
Mutil-Cells Battery Charge Mangement
Features and Use Guide of CN3722
- datasheet please see datasheet section below
- Support multi-cells, 5A max.
- Photovotaic MPPT Function
- Trickle-current charge, CC and CV charging Mode
- Trickle - on board backside R9 resitor to pin8, can be used to enlarge the trickle-current charge current.
- All following information from datasheet
- Detect constant-current charge current = Ics, according to datasheet Ics = 200mV/Rcs, board example:
Ics = 200mV / ( 2 x parallel 0.33R = 0.17R ) = 1.17A
- Detect Fb voltage = 2.416 * (1 + R7/R6) + (Ib x R7), in case (Ib x R7) is difference, Ib normally 50nA, we simply igore it first here, board example:
Vfb (Vbat) = 2.416 * (1 + R8/R9) = 2.416 * (1 + 13.7K/28K) = 3.589V, around 3.6V
- MPPT voltage setup, board example
Vmppt = 1.04 x ( 1 + 220K / 13.7K)
- Charge voltage VCC should be always 2V higher than stop voltage of battery, for example, if you have 3x 4.2V = 12.6, please supply 15V.
- Parts selection guide, refer from datasheet
|Header text||Header text||Header text|
|Diode D1 D2||30BQ015||50WQ03FN。|
- Rcs, 1A -> 2ohm, 2A -> 1ohm, 3A -> 0.067ohm, 4A -> 0.05ohm, 5A -> 0.04ohm,