EDGPU1 Design

From ElectroDragon
Revision as of 06:04, 4 January 2021 by Chao (talk | contribs) (Created page with "== Design Procedures == === Set basic project parameters === * Baudrate can be set at GUI project preference === Set Front English/Chinese === * Only support JPG * Copy imag...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Design Procedures

Set basic project parameters

  • Baudrate can be set at GUI project preference

Set Front English/Chinese

  • Only support JPG
  • Copy images and enter generate
  • Notice the image freqencuy will be used for BPIC

Generate dot matrix data for images

Design Interface

  • Edit at batch interface
  • Save a batch of commands in EDGPU, when use only need to call the sequence of batch interface, save MCU RAM
  • When use this batch interface, enter SPG(1);
  • Batch interface can stack together, for example, left corner is the battery status, right is signal

upload

  • Upload data to display when all setup
  • Click upload