ENC28J60

From ElectroDragon
Jump to navigation Jump to search

ENC28J60 Breakout

Pin definition

1 CS 2 RST
3 SI 4 SCK
5 INT 6 SO
7 NC 8 CLK
9 VIN / VCC 10 GND


Use with Arduino

  • Wiring
172004eierrfwri9xsfamq-1.jpg

Arduino as Ethernet Web Server

  • Download the ENC28J60 library. Unzip the library to IDE library.
  • Connect the ENC28J60 Mini Ethernet Module to Arduino, notice the switch is choosing 3.3V or 5V. The IO as below: CS - 10 , SI - 11 , SO - 12 , SCK - 13
  • Select the IDE arduino-xxx/example/etherShield/etherShield_webserver.
  • Plugin the USB to Arduino , and then input the IP such as : http://192.168.1.15/. It will show as below informaion.