HP25 LED Panel

From ElectroDragon
Revision as of 05:00, 19 October 2021 by Chao (talk | contribs)
Jump to navigation Jump to search


Pin Definitions

Arduino Header text PIN Left PIN Right Header text Arduino
- VCC 1 8 GND -
0 IR 2 7 LED 4
1 BTN 3 6 UPDI 5, PROG
2, PA1 TXD 4 5 GND_detect 3, RX_PA2


Arduino Definitions

#define IR 0
#define BTN 1
#define GND_detect 3
#define LED 4
Programming Setup TX/RX to pin PA1 and PA2

Programming

  • Prepare Arduino Nano UPDI programmer
  • Connect UPDI, VCC and GND three lines
  • upload code by "uploading using programmer", and select programmer "jtag2updi"


Schematic