L293

From ElectroDragon
(Redirected from L293D)
Jump to navigation Jump to search

Arduino Shield L293D

RPI Motor Drive Shield L293D

Schematic

RaspiRobot Board.jpg

Kit Includes

  • 1 x Raspberry Pi Motor/Robot Board PCB
  • 1 x L293DNE 4-Channel Motor Driver
  • 1 x SN7406N Hex Inverter Buffer/Driver
  • 1 x LM2940 Voltage Regulator
  • 3 x 270 Ohm Resistors
  • 1 x 470 Ohm Resistor
  • 4 x 1K Resistors
  • 1 x 220uF Capacitor
  • 1 x 100uF Capacitor
  • 1 x 0.1uF Capacitor
  • 2 x Green 3mm LEDs
  • 2 x 2-Pin Female Headers
  • 2 x Male Pin Headers
  • 2 x 4-Pin Female Headers
  • 1 x Female Header 2x13
  • 2 x 2-Pin 3.5mm Screw Terminals
  • 1 x DC Barrel Jack Connector

Docuemtns