MCU Relay

From ElectroDragon
Revision as of 12:32, 15 May 2018 by Chao (Talk | contribs) (Created page with "=== Use guide === '''Power on ->"normal mode"''' * Read last config from MCU * Start to count, when count to 0, turn on relay * LONG press bottom button -> enter into the conf...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Use guide

Power on ->"normal mode"

  • Read last config from MCU
  • Start to count, when count to 0, turn on relay
  • LONG press bottom button -> enter into the config mode of "turn on relay"

In the config mode for "the stage of active relay"

  • Short press top button to add one second
  • Short press bottom button to add 50 seconds
  • Long press bottom button to enter into next the config mode of "turn off relay "

In the config mode for "the stage of deactive relay"

  • Short press top button to add one second
  • Short press bottom button to add 50 seconds
  • Long press bottom button to save data, and back to "normal mode"