|
|
| (3 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | == Windows Reference Guide ==
| + | #redirect [[category: Modem]] |
| − | <gallery>
| |
| − | File:Modern_connection_01.jpg | 01
| |
| − | File:Modern_connection_02.jpg | 02
| |
| − | File:Modern_connection_03.jpg | 03
| |
| − | </gallery>
| |
| − | == Linux Reference Guide ==
| |
| − | === Driver free for SIM5360 in Linux ===
| |
| − | * Just connect via USB cable directly: Bus 001 Device 006: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem
| |
| − | <gallery>
| |
| − | File:2018-06-21_141320.png | wwan0 modem
| |
| − | File:2018-06-21_141330.png | recorgnized USB device SIM5360E
| |
| − | </gallery>
| |
| − | | |
| − | === Wvdial ===
| |
| − | ==== Install ====
| |
| − | [[File:Wvdial.jpg|thumbnail]]
| |
| − | * by command sudo apt-get update and sudo apt-get install ppp usb-modeswitch wvdial
| |
| − | | |
| − | ==== Obsolete ====
| |
| − | * Get modem config file: tar -xzvf /usr/share/usb_modeswitch/configPack.tar.gz 05c6\:9000 ('''get error on this step, probably no config file yet ''')
| |
| − | * Config the default USB modem by nano /etc/usb_modeswitch.conf, copy message content
| |
| − | ==== Config ====
| |
| − | * Config for SIM7600
| |
| − | * Config version 1 nano /etc/wvdial.conf
| |
| − | <source lang="text">
| |
| − | [Dialer 3gconnect]
| |
| − | Init1 = ATZ
| |
| − | Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
| |
| − | Init3 = AT+CGDCONT=1,"IP","internet"
| |
| − | Stupid Mode = 1
| |
| − | Modem Type = Analog Modem
| |
| − | ISDN = 0
| |
| − | Phone = *99#
| |
| − | Modem = /dev/gsmmodem
| |
| − | Username = { }
| |
| − | Password = { }
| |
| − | Baud = 460800
| |
| − | </source>
| |
| − | * Config version 2
| |
| − | <source lang="text">
| |
| − | [pialer Defaults]
| |
| − | Init1 = ATZ
| |
| − | Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
| |
| − | Init3 = at+cgdcont=1,"ip","uninet"
| |
| − | Modem Type = Analog Modem
| |
| − | Baud = 9600
| |
| − | New PPPD = yes
| |
| − | Modem = /dev/ttyUSB2
| |
| − | ISDN = 0
| |
| − | Phone = *99#
| |
| − | Password = card
| |
| − | Username = card
| |
| − | </source>
| |
| − | * Config version 3
| |
| − | <source lang="text">
| |
| − | [pialer Defaults]
| |
| − | Init1 = ATZ
| |
| − | Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
| |
| − | Modem Type = Analog Modem
| |
| − | Baud = 9600
| |
| − | New PPPD = yes
| |
| − | Modem = /dev/ttyUSB2
| |
| − | ISDN = 0
| |
| − | Phone = *99#
| |
| − | Password = card
| |
| − | Username = card
| |
| − | </source>
| |
| − | | |
| − | ==== Connect ====
| |
| − | [[File:Wvdial run.jpg|thumbnail]]
| |
| − | old
| |
| − | sudo usb_modeswitch -c /etc/usb_modeswitch.conf
| |
| − | wvdial 3gconnect
| |
| − | new
| |
| − | sudo /usr/bin/wvdial&
| |
| − | [[File:Wvdial run kill.jpg|thumbnail]]
| |
| − | kill
| |
| − | ps -A
| |
| − | sudo kill 499
| |
| − | auto start
| |
| − | sudo nano /etc/rc.local
| |
| − | add /usr/bin/wvdial& before exit0
| |
| − | | |
| − | == References ==
| |
| − | Linux
| |
| − | * Reference find here: https://www.thefanclub.co.za/how-to/how-setup-usb-3g-modem-raspberry-pi-using-usbmodeswitch-and-wvdial
| |
| − | [[category: Network]] | |
