From ElectroDragon
Revision as of 05:25, 13 August 2019 by Chao (talk | contribs)
Jump to navigation Jump to search

Github all resources link.


  • Post-process job, run hex2bin to convert hex to bin for serial download
C:\Users\Administrator\Desktop\N76E003串口下载工具\hex2bin\hex2bin.exe .\Output\GPIO.hex


  • Upload LOROM an APROM use ICP tool
  • upload later APROM use NuvoISP tool

Serial Download Note

  • Need run hex2bin to convert bin file, MCU only support BIN download
  • Please use above post build method for bin file when compile.
  • need reset/repower MCU before and after flash.


  • 1T / 8051: 1T Value Microcontroller, 8051 We are more familiar with the classic kernel;
  • 18KB Flash ROM: better than 8KB Flash, and 18KB of flash space, all can be used as data storage space;
  • Same 1024B SRAM
  • 17 + 1 inputs: better than up to 16 GPIOs;
  • 2xUART, I2C, SPI: Better than SPI / I2C / UART (one more UART);
  • 8ch of 12bit ADC: better than 5ch 10bit ADC;
  • 6ch of individual duty PWM: better than 3 PWM outputs;
  • 10KHz LIRC for WDT reset / WKT;
  • 16MHz HIRC ± 1% Room temp. ± 2% full condition;
  • -40 to 105 ℃ wider temperature range;
  • 2.4V to 5.5V wider supply voltage range;
  • TSSOP20 / QFN20;
  • ESD & EFT: HBM / 8KV MM / 400V, Over 4KV, excellent ESD and EFT, immunity to interference and ESD protection;

Ne76e003 spec.png