Difference between revisions of "RPI GPS Board"

From ElectroDragon
Jump to navigation Jump to search
Line 3: Line 3:
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
 
|-
 
|-
! Header text !! RPI !! Header text
+
! Board Interface !! RPI !! Header text
 +
 
 
|-
 
|-
| Example || Example || Example
+
| SD CS Selection || via 3-way jumper: GPIO8 or GPIO7 || Example
 
|-
 
|-
| SD CS Selection || GPIO8 or GPIO7 || Example
+
| RF(LORA) CS Selection || via 3-way jumper: GPIO8 or GPIO7, via 2-way jumper: GPIO25 || Example
|-
 
| RF(LORA) CS Selection || GPIO8 or GPIO7, or GPIO25 (via 2-way jumper) || Example
 
 
|-
 
|-
 
| RF(LORA) DIO0 || GPIO4 || Example
 
| RF(LORA) DIO0 || GPIO4 || Example
 
|-
 
|-
 
| RF(LORA) RST || GPIO17 || Example
 
| RF(LORA) RST || GPIO17 || Example
 +
|-
 +
| SD: SCK MOSI MISO || GPIO 9 / 10 / 11 || Example
 
|}
 
|}
  

Revision as of 00:12, 29 June 2020

Hardware Configuration

3-way jumper setup

Board Interface RPI Header text
SD CS Selection via 3-way jumper: GPIO8 or GPIO7 Example
RF(LORA) CS Selection via 3-way jumper: GPIO8 or GPIO7, via 2-way jumper: GPIO25 Example
RF(LORA) DIO0 GPIO4 Example
RF(LORA) RST GPIO17 Example
SD: SCK MOSI MISO GPIO 9 / 10 / 11 Example


Software Usage

  • Use serial to read raw data, tutorial here: RPI UART, please make sure login shell on uart is turned off
  • Data output example:
$GPTXT,01,01,01,NMEA unknown msg*58
$GPTXT,01,01,01,NMEA unknown msg*58
$GPTXT,01,01,01,NMEA unknown msg*58
$GPRMC,,V,,,,,,,,,,N*53
$GPVTG,,,,,,,,,N*30
$GPGGA,,,,,,0,00,99.99,,,,,,*48
$GPGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*30
  • recommanded GPS parsing application GPSD