V-cut

From ElectroDragon
Revision as of 22:32, 13 January 2021 by Chao (talk | contribs) (Created page with "* 1. You must keep 0mm for the edge of all the close boards, so all edges are stacked. * 2. You can not get the left and side V-cut for the top board, because the V-cut can n...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • 1. You must keep 0mm for the edge of all the close boards, so all edges are stacked.
  • 2. You can not get the left and side V-cut for the top board, because the V-cut can not be stopped inside of the panelized PCB.
  • 3. The total size penalized board must be over 60x60mm total size, otherwise can not be put into the machine.