- Description
- Additional information
- Reviews (3)
- Enquiry2
Description
Compare to the original version, it has two differences:
- USB-TTL Bridge CP2102 is replaced by CH910x or other similar (CH_V)
- Board size is slightly larger
Board Features:
- Based on ESP-12E ESP8266 wifi board
- All I/Os output
- No need to press reset/flash for pgoramming
- Open source support: www.nodemcu.com
- Notice the board is larger, not breadboard friendly!
Documentation please visit nodemcu.com or our this wiki page.
Additional information
| Weight | 0.025 kg |
|---|
![[Retired] Audio Cable 3.5mm Extension](https://www.electrodragon.com/wp-content/uploads/2011/12/T1z2NYXf4xXXam8vZ0_034945.jpg_310x310.jpg)
![[Retired]2.4G-Wireless Camera](https://www.electrodragon.com/wp-content/uploads/2012/01/2.4G-Wireless-Camera.jpg)
![[Retired] HY 3.2" TFT LCD (w/Touch Panel, w/o SD slot)](https://www.electrodragon.com/wp-content/uploads/2011/12/3.2inch-320x240-Touch-LCD-A-11-400x400.jpg)
![[Retired] One Channel Relay Module (Arduino supported)](https://www.electrodragon.com/wp-content/uploads/2012/01/relay-module2.jpg)
![[Retired] ITDB02 3.2" TFT LCD Board (240*320, w/SD Slot, Touch Panel)](https://www.electrodragon.com/wp-content/uploads/2011/12/IDTB-3.2-Display-1-400x400.jpg)
![[retired]2PCs Banana to Banana Cables (A Pair in Black&Red)](https://www.electrodragon.com/wp-content/uploads/2011/12/00507-02-L-400x400.jpg)
![[retired]2PCs Banana to IC Hook Cables (A Pair in Black&Red)](https://www.electrodragon.com/wp-content/uploads/2011/12/00506-02-L-400x400.jpg)
![[Retired]8051 Extended Dev. Board R3](https://www.electrodragon.com/wp-content/uploads/2012/01/8051-minimal-system-v3-1-400x400.jpg)
![[Retired]USBtinyISP Programmer](https://www.electrodragon.com/wp-content/uploads/2011/12/USBtinyISP-Programmer-2-560x560.jpg)
narioinc89 –
Awesome product. No issues with drivers on ubuntu. Works as expected with nodemcu project
cromdeveloper –
Muy buen producto!!
lbeck37 –
I have one of these and the USB connector no longer connects securely and power to the board cycles with minor movement of the board or cable. Switched to a real NodeMCU and the problem went away.