LAN8720 Ethernet ESP32 Shield PHY [Version]

3 reviews for LAN8720 Ethernet ESP32 Shield PHY [Version]

1. 5 out of 5

   Felix – November 20, 2018

   Board works well, but wiki page is wrong (MDIO is connected to IO18, not IO19). Also, I had to remove the capacitor C15 from my ESP32-DevKitC to get the clock signal to work (as stated here: https://github.com/espressif/esp-idf/blob/master/docs/en/get-started/get-started-devkitc.rst#note-on-c15).

2. 3 out of 5

   Chao (store manager) – November 20, 2018

   Thanks for the review, should be a writing error on wiki, will fix it. The board boot of the clock signal is conflicted with esp32 IO0, we leave it a flexible design, because we are not sure how to fix it 100%. Thanks.

3. 5 out of 5

   Heinz Meulke (verified owner) – July 26, 2024

   I bought a V2 to test. This was so easy to setup with Esphome, It took me 5 minutes. Cool ethernet module Works well! This is a really awesome way to add connectivity for mission critical applications.
   You need this config in your project:
   ethernet:
   type: LAN8720
   mdc_pin: GPIO23
   mdio_pin: GPIO18
   clk_mode: GPIO0_OUT
   phy_addr: 1