AVR ISP 10P to ICSP 6P Converter
$1.20
- Description
- Additional information
- Reviews (4)
- Enquiry2
Description
This is an adapter assembly that converts 2×5 pin connector to 2×3 pin mini-ICSP. Comes with a mini-ICSP cable terminated female at both ends. The adapter board comes terminated as male 2×3 pin to female 2×5 pin.
Functions:
- On the standard ATMEL ISP10 converted into standard ISP6 connector
- For AT89S5x and AVR series MCU, it converts interface for download programme.
- Arduino firmware programming interface converter, check this on our wiki page here.
Additional information
| Weight | 0.005 kg |
|---|
![CP2102 USB-TTL Serial UART Module [Version]](https://www.electrodragon.com/wp-content/uploads/2013/08/CP2102-USB-TTL-Serial-UART-Module-01-400x400.jpg)
![2PCs Connection Cable [Pins]](https://www.electrodragon.com/wp-content/uploads/2012/04/10Pin-IDC-ISP-Cable-400x400.jpg)
![USB-TTL USB-Serial Cable [PL2303TA, CH340]](https://www.electrodragon.com/wp-content/uploads/2015/05/PL2303TA-USB-TTL-560x560.jpg)
muzy (verified owner) –
Simple and great. Use it in combination with the USBasp to program your circuits using the 6-pin header.
Alfius (verified owner) –
Very handy to flash Arduino via ICSP 6-pin connector, for example to re-flash the Arduino boot-loader.
Gloria (verified owner) –
Good tool for Arduino, flash boot-loader in your board via ICSP
thiagoas (verified owner) –
Very useful to ISP program with usp asp.