Install mingw +GCC on windows, find mingw installer on google: https://sourceforge.net/projects/mingw/ Install mingw base and gcc in installer: Setup environment path: in control panel – system and safe – system – advanced system setup – environment setup and find path Check if the path is working correctly: enter into console CMD: gcc -v Install notepad,
We have tried first round of test, very very simple setup, to just make sure all can work and what is the performance by default without any optimize. Setup of NRF24duino: A pair of module, both flashed with get_started sketch receiver module powered by 9V battery (on board xc6206 only support up to 6V, this
We are pleased to inform that our boards and modules have been used during course “Internet of Things” at the WSB University in Wroclaw (Poland, UE). Students learned about the ability to build and programing “Smart Home” using the Electrodragon Relay boards, modules, various sensors, and LEDs and displays. PlatformiIO was used for example programming.
ESP3212 board based on ESP32 IC will be ready on around 20th, this is the date we asked from supplier ai-thinker, they said they are still debugging the board, date can not guarantee, maybe delay again. We will sell the same price as anywhere else. Most information we can find are placed on this page now.
Thanks to customer Mark, here is wiring diagram of the flow sensor/meter with esp8266, the key point is needing a 555 timer chip as a Schmitt trigger. Also the VCC voltage of flow sensor is 5V, and esp8266 is 3v3, a voltage divider is needed in the circuit. You can find the flow sensor here. Updated to
It seems the current online custom build with dev branch can not work well with smartconfig, or the ESP8266 smart config android APK, so we tried to figure with the espressif official APK and master branch. The master branch is: Build on ESP8266 NONOS SDK 1.4.0, support ESPTouch 0.3.4.3 Dev branch version is Espressif NONOS SDK
You can find the mentioned items in our store here. This is a demo test of the pair of wireless power charger, five LEDs connected paralleled on the receiver end, output more than 200~300 mA (over range of display) current. There are some more notes: We use a very thin plastic bag to separated the receiver
Pick and place file output from eagle, and copy into a SD card for use. The machine only running 10% speed of normal, but actually it can run 150% speed of normal. Each time pick and place work include the following steps: Move to the PCB 0,0 (x,y) zero point, which is locate on the
Shipment Suspend: We will have a long holiday from 4th till 13th, delivery can not be fulfilled during this time. Holiday promotion: Use coupon code “2016-year” to get 10% discount. This discount is not conflicting with your member discount. PCB service PCB service will restart on 14th, please notice. If you place PCB order now, we will
A simple breakout board of ESP8266 on breadboard can do most of NodeMCU work. Also need a PL2303 USB-TTL programmer Most wifi embedded project will not have too much input and output resource to let the user enter the wifi SSID and password info, so we normally config this via phone app. This is the