ESP-01 new 101
ESP8266 WI07c Wifi Module 02
ESP8266 WI07c Wifi Module 01
ESP8266 New
ESP-01 new 101 04
ESP-01 new 101
ESP-01 new 101 03
ESP-01 new 101 02

[Retired]ESP-01 ESP8266 Wifi Module, 1MB (Replaced by ESP-01S)

[Retired]Raspberry Pi Model B+
[Retired]ProgBee UART Programmer (Xbee Supported)
4.76 out of 5
23 customer reviews|Add a review

$2.60

Availability: Out of stock SKU: NWI1021 Category: Tags: ,

Description

A new updated version ESP-01S available here, small updates. 

This is a wifi solution based on IC ESP8266 from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily!

 

Features:

  • 1MB (8Mbit) Flash size.
  • Very competitive price
  • AP, STA, AP+STA modes available.
  • Very simple AT commands, easy to use.
  • Internal LWIP interface.
  • Only four pins interface, VCC-3V3, GND, TXD and RXD.
  • Latest firmware. New IC ESP8266ex

Additional information

Weight 0.01 kg

23 reviews for [Retired]ESP-01 ESP8266 Wifi Module, 1MB (Replaced by ESP-01S)

  1. 5 out of 5

    nitroxide (verified owner) –

    Absolute cheapest WiFi module!

  2. 5 out of 5

    Charles (verified owner) –

    After playing with this for a while, I’ve found it to be quite competent, able to connect to WPA2 networks effortlessly. Very quick link time, too.

    The AT command set is awkward to automate, but not impossible. It’s also very difficult to communicate at high speed bi-directionally without stomping on your data… But if you’re looking for a few packets here and there, this is great!

    I can’t believe it actually works… And it works surprisingly well. Nothing like this exists to my knowledge. Small, cheap, great!

  3. 5 out of 5

    mschroeer (verified owner) –

    Great item for a decent price. Complete wifi functionality – can connect to infrastructure, run as access point, both simultaneously.
    Easy to configure and connect to uC using AT commands.
    Really like it.

  4. 5 out of 5

    Philip (verified owner) –

    Just perfect! I got the new version and it’s working fine (limited functionality but more to come).
    Fast shipping with prepaid vat, to EU was a +++

  5. 4 out of 5

    arden –

    I want to setup a static ip address(I do not have a dhcp server in my network), I can’t find one AT command to set the IP address of client in Station mode(1).

  6. 5 out of 5

    defconhaya (verified owner) –

    Great device !
    It’s extremely tiny !
    I was amazed by the fast shipping: from China to Europe only 9 days !

  7. 5 out of 5

    overdrive (verified owner) –

    Cool little wifi module. Make sure you read all the material available on the use of this device to save you frustration. Very useful once you get it working. For the price you cant go wrong.

  8. BT (verified owner) –

    Can anyone share the wiring for the pins, especially the middle four pins?
    Different websites provide different instructions.

  9. 5 out of 5

    cem2ran (verified owner) –

    Great product and shipping time was far quicker than usual(china)!

  10. 5 out of 5

    dan.allain –

    Excelling wifi module with built-in microcontroller. Wireless projects with just 1 very small board.

  11. 5 out of 5

    Kenneth (verified owner) –

    Very nice working very well

  12. 4 out of 5

    Bart (verified owner) –

    Some extra info on this versatile device can be found on https://nurdspace.nl/ESP8266 and http://www.esp8266.com. One can also replace the firmware by a FreeRTOS or NodeMcu (Lua) port. Note that only a few pins are available, so you may want to consider ordering one of the other packages (e.g. SMD) instead.

  13. albantor30 (verified owner) –

    Great little piece of hardware! Although the support is still experimental and spread all over the internet, this WiFi module is easy to get working, and adds wireless internet connectivity to your project for a ridiculous low price!
    The best way to get it work and familiarize with this chip is to control it directly from a serial terminal using a USB-UART module.
    Also, don’t forget to flash the latest firmware on the chip.

  14. 5 out of 5

    kremen (verified owner) –

    nice unit… cant believe the price of wifi connectivity these days.. so cheap.. had no problems flashing with new firmware either..works a treat..
    electrodragon rock.. fast delivery and great service form chao.. havn’t had a problem in the 3 years ive been using them.

  15. maguye007 (verified owner) –

    Very nice module. Got two of these and loaded the NodeMCU Lua firmware on them, and wow, they really are worth all the buzz around them. Ensure you use a proper UART device (eg FTDI FT232 or similar) with proper level-shifting if required. Other than that, solid modules!

  16. 5 out of 5

    pedram –

    hello
    i have 2 eps-01
    one work true
    other worked at first but now not work in client mode
    it display: DNS Fail. but micro controller is same
    first work true and secound not work
    how can set DNS

  17. oschwandelectrodragon.com (verified owner) –

    Works perfectly with NodeMCU. A must to have.

  18. ghaneipour pedram –

    it is a good solution
    i need know that how i can use in iot.
    is need micro controller . or can use without micro

  19. Chao (store manager) –

    Hello ghaneipour pedram,

    Please see the description on this product, they are the same,
    https://www.electrodragon.com/product/esp-12f-esp8266-wifi-board/

    this board has MCU inside, can run in both way.

  20. 5 out of 5

    remidechazellesdiy –

    Perfect. Works exactly as expected !

  21. 4 out of 5

    koursaros (verified owner) –

    good but there are better modules here in electrodragon

  22. 4 out of 5

    thiagoas (verified owner) –

    Nice and cheap MCU.

  23. 5 out of 5

    diazfjg (verified owner) –

    Esp8266 is the best module for IOT. I LIKE IT!!!

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Product Enquiry