GNSS Module, GPS Beidou, ATGM336H-5N
$8.50
- Description
- Additional information
- Reviews (0)
- Enquiry2
Description
ATGM336H-5N
- Based on the fourth generation of low-power GNSS SOC Chips – AT6558
- All tracking system supported – GPS/US, Beidou/CN, GLONASS/RU, Galileo/EU, QZSS/JP, SBAS/enhanced system, all in one.
- Contains 32 tracking channels that can receive GNSS signals from six satellite navigation systems simultaneously and enables joint positioning, navigation and timing.
- High sensitivity, low power consumption, low cost
- Suitable for car navigation, handheld positioning, wearable devices
- Can replace Ublox MAX, NEO-6M, 7M, 8M directly.
- Output standard NMEA0183 signal from serial.
More Features:
- Support A-GNSS
- Cold start capture sensitivity: -148dBm
- Tracking sensitivity: -162dBm
- Positioning accuracy: 2.5 meters (CEP50, open area)
- First positioning time: 32 seconds
- Low power consumption: continuous operation <25mA (@ 3.3V)
- Built-in antenna detection and antenna short-circuit protection
Board Features:
- Board size 15.7 x 13.1 mm
- Package include main board and ipex antenna.
- Pin Definition 5V, GND, TXD, RXD, PPS. (PPS output time signal which can be connected to MCU IOs)
Datasheet, documentation please see wiki page.
Additional information
| Weight | 0.01 kg |
|---|---|
| Celluar Location Tech | BDS/GPS/GLONASS |

















![[Retired] Ublox 6th IC GPS module](https://www.electrodragon.com/wp-content/uploads/2012/08/Ublox-6th-IC-GPS-module-1.jpg)

![A7670 LTE CAT-1 GSM GNSS BT Mini Module V2 [VER]](https://www.electrodragon.com/wp-content/uploads/2021/06/A7670-V2-02-400x400.jpg)




![A7670 LTE CAT-1 GSM GNSS BT Full Function Module [VER]](https://www.electrodragon.com/wp-content/uploads/2025/06/A7670-LTE-CAT-1-GSM-GNSS-BT-Full-Function-Module-VER-01-400x400.jpg)
Reviews
There are no reviews yet