Battery Charger by Solar Powered System or USB
$1.90
- Description
- Additional information
- Reviews (0)
- Enquiry2
Description
Chip Features:
- Constant-current /constant voltage linear charger for single cell Li-ion and Li Polymer rechargeable batteries
- Suitable for Solar-Powered System
- Automatic Low-Power Sleep Mode When Input Supply Voltage is Removed
- on-chip power MOSFET and eliminates the need for the external sense resistor and blocking diode.
- An on-chip 8-bit ADC can adjust charging current automatically based on the output capability of input power supply, so it is ideally suited for solar powered system
- Automatic Recharge
Board Features:
- Setup charging current is up to 1000 mA
- On board charging and charge-done two LEDs.
- Input solar panel voltage 4-6V
- Support input power from USB or solar power.
- When you put input solar power under lamp or sun, charging LED will light up.
Additional information
| Weight | 0.01 kg |
|---|


![Loraduino Lora RF Wireless Dev. Board, Arduino Compatible [Freq.]](https://www.electrodragon.com/wp-content/uploads/2026/04/2026-04-28-13-19-17-400x400.png)





![[retired] M5Stack ESP32CAM Camera Module, ESP32 + OV2640](https://www.electrodragon.com/wp-content/uploads/2018/08/M5Stack-OV2640-Camera-Module-01-560x560.jpg)

![[Retired] 1-To-3 USB Hub w/Ethernet Port](https://www.electrodragon.com/wp-content/uploads/2013/07/1-To-3-USB-Hub-wEthernet-Port-560x558.jpg)
![Handy USB Lithium Battery Charge Cable [VER]](https://www.electrodragon.com/wp-content/uploads/2025/06/Handy-USB-Lithium-Battery-Charge-Cable-VER-03-400x400.jpg)






Reviews
There are no reviews yet